Acme SS111 - Manual (Page 6)

6
GB
Operations
1. Make sure that USB cable is unplugged.
2. Make sure that Volume and BASS knobs are set to the minimum level.
3. Plug one satellite speaker into “L“ socket in the back of the other satellite.
4. Connect the Ø3.5 mm signal input cable to the audio frequency output jack of the PC or sound
appliance.
5. Plug USB power cable into the computer’s or external powered HUB’s USB port. LED indicator in
the back of satellite will start to shine blue.
6. Rotate VOL and BASS knobs to set desired sound volume and bass level.
7. Set VOL and BASS knobs to the minimum before unplugging USB cable from source or if
speakers are not in use.
Waste Electrical and Electronic Equipment (WEEE) Symbol
The use of the WEEE symbol indicates that this product may not be treated as
household waste. By ensuring this product is disposed of correctly, you will help
protect the environment. For more detailed information about the recycling of this
product, please contact your local authority, your household waste disposal service
provider or the shop where you purchased the product.