Siemens TK76001 - Manual (Page 35)

1
de en
Menu settings
● Hold the j
.button.down.for.at.least.3.
seconds.
The.different.setting.options.are.now.
displayed.
s
ettings
L
anguage
e
ngLish
W
ater harDness
D
escaLe
In.the.following.operating.instructions,.each.
new.setting.begins.with..
j
3.sec. +
>
followed.by.an.exact.description.
The.different.setting.options.can.be.
selected.with.the.
<
.and.
>
.buttons.4.
s ettings
W ater harDness
D
escaLe 
s
tart
c Lean
N.B.:.The.changes.you.have.made.are.
saved.automatically..
It is not necessary to confirm them
additionally.
.
j
3.sec. +
> L
anguage .
● Turn the knob 6.to.select.the.required.
language
j
3.sec. +
> W
ater harDness
● Turn the knob 6.to.select.the.required.
water.hardness.
1,2,3
.or.
4
.
Note: It.is.important.to.set.the.water.
hardness.correctly,.so.that.the.appliance.
indicates.accurately.when.the.descaling.
programme.should.be.run..The.factory.
setting.for.the.water.hardness.is.
4
..
You.can.check.the.water.hardness.using.
the.enclosed.test.strip.or.by.asking.your.
local.water.supplier..
● Dip the test strip in the water briefly and
check.the.result.after.1.minute.
Level Water.hardness
German.(°dH) French.(°fH)
1
2
3
4 1­7
8­14
15­21
22­30
1­13
14­25
26­38.
39­54
j
3.sec. +
> D
escaLe
● If you want to descale the appliance,
press.the.start.button.8.and.run.the.
descaling.programme.(see.“Descaling”).
j
3.sec. +
> c
Lean
● If you want to clean the appliance, press
the.start.button.8.and.run.the.cleaning.
programme.(see.“Cleaning”).
j
3.sec. +
> c
aLc
‘
n
‘c
Lean
● If you want to descale and clean the
appliance,.press.the.start.button.8.and.
run.the.Calc‘n‘Clean.programme.(see.
“Calc‘n‘Clean”).