Bi stro – Bodum BISTRO Электрическая кофемолка User Manual

Page 8

stro

GrInDer

The BODUM

coffee grinder uses conical burr grinder, which

are the best grinders you can get. The burr spins slower than

the wheel model, which makes them quieter and less messy.

You can use a conical burr grinder for oily or flavoured cof-

fees and it is not likly to clog, like the other kinds of grind-

ers. These are the best.

stone sAfetY cut-out feAture

Given the huge quantities of coffee that are packed every

day, very small stones may accidentally find their way into

even the finest coffee beans. The appliance is equipped

with a stone safety cut-out - or «friction clutch» - in order

to prevent damage to the grinding gear. A stone in the

grinding gear will cause a loud rattling noise. Switch the

appliance off immediately, remove plug from wall outlet,

open it as described in the section entitled «Maintenance»

and remove the stone.

MAIntenAnce

CLEANING THE GRINDING GEAR.

Disconnect the mains plug from the socket outlet. Remove

any remaining beans in the bean container (fig.18) and take

the latter off by twisting it in an anticlock-wise direction as

far as the release area stop (fig.19). Lift the bean hopper

from the housing (fig.20). The grinding ring can then be

lifted out of the machine.
A soft-bristle brush is ideal for cleaning the grinding gear.

Reassemble the machine by performing the above opera-

tion in reverse order. The housing, lid (1), coffee bean

container (2) and grinding mechanism cover (5) are easy to

clean using a damp cloth. The ground coffee container (6)

and its lid (7) are dishwasher-proof.
Any other servicing should be performed by an authorized

service representative.

PoLArIZAtIon

For US Customers only
This appliance has a polarized plug (one blade is wider
than the other).
To reduce the risk of electric shock, this plug will fit in appo-

larized outlet only one way. If the plug does not fit fully in

the outlet, reverse the plug. If it still does not fit, contact

a qualified electrician. Do not modify the plug in any way.