Boneco Air-O-Swiss E2441A - Manual (Page 18)

12
Troubleshooting
Repairs to electric appliances can only be car-
ried out by specialists. Through improper repairs,
considerable danger for the operator can result
and warranty claims lapse.
WARNING
Danger to life through electrical shock!
▶ Do not carry out any repairs on electrical parts.
Fault Cause Solution
The unit is not working. Power plug is not plugged
in.
▶ Plug in the power plug and switch the unit on.
Water base was not
inserted when putting the
unit together.
▶ Insert the water base (see chapter "Putting the
unit together").
No water in the water
base.
▶ Fill the water base (see chapter „Filling the
unit“).
Grinding noises Water base not inserted
correctly.
▶ Insert the water base correctly (see chapter
"Putting the unit together").
No air humidification No water in the water
base.
▶ Fill the water base (see chapter "Filling the
unit").
Calcified evaporator wick.
▶ Replace the evaporator wick (see chapter "Re-
placing the evaporator wick").
Water level indicator ring
with fill level ring not vis-
ible when filling. Unit component forgot-
ten when putting unit
together.
▶ Unplug the power plug.
▶ Check if the unit is put together correctly
(drawing B).
Unit put together incor-
rectly.
Unit is losing water. Unit was overfilled.
▶ Empty the water (see chapter "Taking apart the
unit").
▶ Dry the unit. In doing so, wipe up water that
has leaked.
A unit component was
forgotten when putting it
together.
▶ Unplug the power plug.
▶ Check if the unit is put together correctly
(drawing B).
Unit put together incor-
rectly.
Unit emits a bad odor. Evaporator wick is dirty.
▶ Replace the evaporator wick (see chapter "Re-
placing the evaporator wick").