Candy AB CST 10 M - Manual (Page 10)

12
Stick the adhesive label provided on the support
which goes into the groove on the back of the
panel visor.
PUTTING YOUR MACHINE IN PLACE-MOVING
IT
Thanks to its four stabilising feet (the front two are
adjustable), your machine does not require any
special placement, although the floor where the
machine stands should be flat and level.
Ensure that the On/Off button is not pressed
Ensure that all controls are set to “0” and that the
lid is shut.
Insert the plug.
Selecting the programme.
Press the On/Off button. The power on light will
light up. If this does not light up see faults search.