Candy FP 825 X AUS - Manual (Page 12)

• It allows you to preset the
cooking time required for
the recipe chosen.
• This function is typically
used with “cooking time”
function. For example
if the dish has to be cooked
for 45 minutes and needs
to be ready by 12:30,
simply select the required
function, set the cooking
time to 45 minutes and the
end of cooking time to
12:30.
• Cooking will start automa-
tically at 11:45 (12:30
minus 45 mins) and will
continue until the pre-set
end-of-cooking-time, when
the oven will switch itself
off automatically.
WARNING.
If the END of cooking is
selected without setting
the length of cooking time,
the oven will start cooking
immediately and it will
s t o p a t t h e E N D o f
cooking time set.
• Enables you to operate
the oven.
• Sounds an alarm at the
end of the set time.
• To check how long is
left to run press the
button
USE OF ANALOGUE CLOCK/PROGRAMMER
Red hand (F)
(start of cooking time)
(E)
Blue hand (C)
1.
2.
SETTING THE CORRECT TIME
To set the correct time pull and turn the knob 1 until the clock
shows the correct time. Once this is done release the
control 1.
• At the end of the cooking
time set, the oven will
switch off automatically
and an audible alarm
will ring for approx. 3
minutes
• To cancel the set function
line up the clock hand (F)
with the hour hand (G) and
proceed by turning the
control knob 2 clockwise
until the symbol
appears in the window (E)
- Pull and turn the control
knob 2 to line up the hand
(F) with the clock hour
hand
• The alarm can be stopped
by turning the control knob
2 until the symbol
appears in the window (E)
• When the set time has
elapsed an alarm will
sound for approx 3
minutes.
• To stop the alarm turn the
control 1 until the Blue
hand C is on the
symbol
•Turn the control knob 1
until the blue hand C is
on the required time.
• Max 55 minutes MINUTE MINDER
• Allows to use the oven as
alarm clock (could be
activated either with
operating the oven or
with out operating the
oven)
• For cooking the desired
recipes MANUAL
FUNCTION
• Turn the control knob 2
clockwise until the symbol
appears in the window
(E)
• Turn the oven function
selector to position O.
• First of all select the
cooking function and the
temperature required
• Set the length of
cooking required by turning
the control knob 2
clockwise until the time
matches the length of time
shown in the window (E)
• The oven will start
immediately and it will
switch off automatically at
the end of the preset time
• Max time 180 minutes
(3 hours)
• At the end of the set
time the oven switches off
automatically, this is
indicated by an audible
alarm, this will ring for
approx. 3 minutes
• To cancel the setting and
or the alarm, turn the
control knob 2 until the
symbol appears
in the window (E)
• At the end of the cooking
time set, the oven will
switch off automatically
and an audible alarm will
ring.
• First of all select the
cooking function and the
temperature required.
• Prior to selecting the
cooking
start time ensure that the
symbol is showing in
the window (E)
• To set the cooking start
time pull and turn the
control knob 2 either
clockwise or anticlockwise
until the hand F is in the
position indicating the
start time required.
• To set the length of
cooking required turn the
control knob 2 until the
time required appears in
the window (E).
• Enables you to set the end
of cooking time
ATTENTION : the oven only operates if set on manual function
or preset time.
FUNCTION HOW TO ACTIVATE IT HOW TO SWITCH IT OFF WHAT IT DOES WHAT IT IS FOR
COOKING
TIME
END OF
COOKING
11 GB