Candy GO DC 78-37 - Manual (Page 11)

Control panel and indicator lights
Programme Selector – Select the required programme.
On/Off button and indicator – Press to switch on, the indicator will light. The
display will show the selected programme (see Programme Guide).
Acrylics/Synthetics button (Delicados Sintéticos) – Press to reduce the heat
level for delicate items, the indicator above the button will light up. To change
the heat setting the programme must be reset.
Low Heat - Indicator light ON
High Heat - Indicator light OFF
Start button – Press Start to commence the selected drying programme. Press
for 5 seconds to cancel/reset the programme.
Delay Start button (Inicio Diferido) – Allows the user to delay the start of the
drying cycle (see details of Operation on page 16).
Buzzer button (No Alarma) – The buzzer is active in normal operation. To
cancel the buzzer press the button and the indicator will light up.
Empty Water indicator (Deposito Lleno) – Lights when the water container
tray is full.
Filter Care indicator (Filtro) – Lights when the filter needs cleaning.
Time to End indicator (Tiempo Fin) – Lights when the program starts.
Start Delay indicator (Inicio Diferido) – Light flashes when the program starts.
Digital Display – The two digit display indicates the selected programme, the
Start Delay and the Time to End of the programme.
11
Controls and indicators
ACRYLICS/
SYNTHETICS
BUTTON
(Delicados Sintéticos)
ON/OFF
BUTTON
DELAY START
BUTTON
(Inicio
Diferido)
FILTER CARE
INDICATOR
(Filtro)
EMPTY WATER
INDICATOR
(Deposito Lleno)
PROGRAMME
SELECTOR
START
BUTTON
BUZZER
BUTTON
(No Alarma)
TIME TO END
INDICATOR
(Tiempo Fin)
DIGITAL
DISPLAY
START DELAY
INDICATOR
(Inicio Diferido)
40004990.qxd 28/06/2007 15:31 Page 11