Candy CC2 77 T-86S - Manual (Page 11)

Control panel and indicator lights
Programme Selector – Select the required programme
On/Off button and indicator
– Press to switch on, the indicator will light.
The display will show the selected programme (see Programme Guide )
Acrylics/Synthetics button
– Press to reduce the heat level for delicate
items, the indicator above the button will light up. To change the heat setting
the programme must be reset
Low Heat - Indicator light ON
High Heat - Indicator light OFF
Start button – Press Start to commence the selected drying programme. Press
for 5 seconds to cancel/reset the programme
Start Delay button
– Allows the user to delay the start of the drying cycle
(see details of Operation on page 16)
Buzzer button – The buzzer is active in normal operation. To cancel the
buzzer press the button and the indicator will light up
Empty Water indicator
– Lights when the water container tray is full
Filter Care indicator – Lights when the filter needs cleaning
Time To End indicator – Lights when the program starts
Start Delay indicator
– Light flashes when the program starts.
Digital Display – The two digit display indicates the selected programme, the
Start Delay and the Time To End of the programme.
11
Controls and indicators
Acrylics/Synthetics
Button
On/Off
Button Buzzer
Button
Filter Care
Indicator
Empty Water
Indicator
PROGRAMME
SELECTOR
Start
Button
Delay Start
Button
Time to End
Indicator
DIGITAL
DISPLAY
Start Delay
Indicator
40003950.qxd 14/12/2005 17:43 Page 11