Adapting the hob to different types of gas, Gas connection – Candy EH 665 W UK User Manual
Page 6

5
The labels on the Hob indicate the types of gas that can be used.
It is possible to use other types of gas after carrying out simple modifications.
Warning: If gas can be smelt in the vicinity of this appliance turn off the gas supply to
the appliance and call the engineer directly.
Do not search for a leak with a naked flame.
Adapting the hob to different types of gas
To adapt the Hob for use with different types of gas, carry out the following instructions:
— remove the grids and burners
— insert the hexagonal spanner (supplied) into the burner support (Fig. 5)
— unscrew the injector and replace it with one suitable for the gas to be used (see
Table below)
— regulate minimum flame and flame combustion (see nexts chapters).
Gas connection
(see page 11)
Hexagonal spanner
Fig. 5
Table of Gas Consumption
1 W = 0,860 kcal/h
GAS
TYPE
METHANE
MGAS
G 20
BUTANE
GAS
G 30
PROPANE
GAS
G 31
Ø INJECTORS
1/100 mm.
0
93
127
61
84
61
84
NOMINAL THERMAL
POWER
kW
kcal/h
1,5
5
1.290
2,95
2.537
1,5
5
1.290
2,95
2.537
1,5
5
1.290
2,95
2.537
kW
kcal/h
0,38
327
0,65
559
0,38
327
0,65
559
0,38
327
0,65
559
Norm.
Min.
Max.
20
17
25
28/30
20
35
37
25
45
CAPACITY
143 l/h
281 l/h
109 g/h
215 g/h
107 g/h
211 g/h
REDUCED THERMAL
POWER
PRESSURE
m bar
BURNER
MEDIUM
LARGE
MEDIUM
LARGE
MEDIUM
LARGE
Rapid
Semi rapid
Total NHGC
141
10,3
110
5,9
28
81
8,7
65
5,5
25,2
5 mm
4 mm
7 mm
2 mm
LPG
MJ/H
Injector size
LPG gas
Reg. 2,75 kPa
Natural gas
Reg. 1,13 kPa
MJ/H
Injector size
Burner
NG
Quota «X» depending
on type of gas
Cooking hobs 60x50 for Australia