Candy LB CTS 82 - Manual (Page 3)

PREPARING THE WASH CYCLE
1.- Once the washing is loaded, ensure that the drum doors are properly closed.
2.- Add detergent and additives, not exceeding the maximum level indicator.
• detergent for pre-wash I
• detergent for wash programme II
• bleach
• fabric conditioner
SELECTING THE DESIRED PROGRAMMES AND OPTIONS
3.- Turn the programme selector (A) to the desired programme. (clokwise).
4.- Press the key or keys for any options desired (C1, C2).
C1: spin reduction key
This reduces spin speed to the figures indicated (400) at the press of the key.
C2: extra rinse key
The electronic system engaged by this key activates a new special rinse cycle. More water
and a combination of drum rotation movements ensure that washing is perfectly rinsed. The key
can be activated in Cottons, Mixed, Synthetics and Delicates programmes.
5.- Select wash temperature if required (B1)
B1 temperature selector
Use this control to select the wash temperature within the range for the programme selected
(see programme table).
The control can be turned in both directions. Select the required temperature before starting
the programme.
6.- Once you have selected the desired options, press the START key (H). The washing machine
will start up . To cancel an option after setting, just press the option key again.
To change or cancel a programme
To change or cancel a programme once the programme selected has started, proceed as follows:
- Press the key (H). The programme has been cancelled, and another may be selected.
- Select the new programme.
- Press (H) again.
- The machine will then run the new programme selected