Operation, Cancelling and resetting the programme, Start delay – Candy CV1 66- S User Manual
Page 14
1.
Open the door and load the drum with laundry. Ensure that garments do
not hinder closure of the door.
2.
Gently close the door pushing it slowly until you hear the door 'click'
shut.
3.
Press the Start button to switch on the dryer. The indicator will light up
and the START indicator will flash.
4.
Turn the Programme Selector dial to select the required drying program
(see Programme Guide).
5.
If drying synthetics, acrylics or delicate items, press the button to
reduce the heat level.
The light above the push button will light up when the machine is in low
heat setting. To deselect this status when the drying cycle has started it is
necessary to reset the machine
6.
Press the Start button. The dryer will start automatically and the START
indicator will be continuously lit.
7.
The Time Remaining display will show the drying progress in terms of
time remaining.
8.
If the door is opened during the programme to check the laundry, it is
necessary to press Start to recommence drying after the door has been
closed.
9.
When the 15' indicator is lit the machine will enter the cool down phase,
the clothes will be tumbled in cool air allowing the load to cool down.
10. When the programme is complete the STOP indicator will light.
Cancelling and resetting the programme
To cancel a programme press the Start button for 5 seconds. The machine will
indicate that it has been reset by the START indicator flashing. It is possible to
change the programme within the first 10 minutes without using the cancel
and reset function.
Start Delay
The Delay Start Function allows the user to delay the start of the drying
cycle by 6 or 9 hours.
14
Operation
WARNING!
The drum, door and load may be very hot.
40003976Eng.qxd 14/10/2005 17:40 Page 14