Plantronics Voyager 815 - Manual (Page 11)

11 Plantronics Voyager 815
EN
E
N
G
LI
S
H
hEAdSET CONTrOLS
Action Steps
Turn on the
headset Press and hold the call control button until the indicator
glows blue.
NOTE:
When your headset is in standby mode, the indicator is off.
To confirm that your headset is on, press any button or slide the
boom out. You should see a blue light flash or hear a tone.
Turn off the
headset Press and hold the call control button until the indicator
glows red. When the power is off, the indicator stays off.
Answer a call Press the call control button or slide the boom to the open
position.
End a call Briefly press the call control button or slide the boom to
the closed position.
Make a call The call automatically transfers to your headset after you
enter the number on your phone and press send.
Toggle mute
on/off Press the mute button.
Turn off the
online indicator Press and hold mute for 2 seconds while the headset is on.
Headset will flash blue 4 times. Repeat action to activate
online indicators. Headset will flash blue 2 times.
Adjust volume During an active call, press the volume button:
Volume up
Volume down
WARNING: Do not use headphones/headsets at high volumes for an extended
period of time. Doing so can cause hearing loss. Always listen at moderate levels. See
www.plantronics.com/healthandsafety for more information on headsets and hearing.