Plantronics DA45 - Manual (Page 4)

0 0 7 6
WEARING THE HEADSET
1. Identify the components
a
Adjustable headband
b Receiver
c Click stop turret
d Clothing clip
e Headset cord
f Ear cushion
g Boom
h Quick Disconnect TM connector
i Noise-canceling microphone
1
2
3
1
6
8
9 7
4
5
3. Adjust the mouthpiece
3.1 Hold the receiver securely against your ear with one hand.
With your other hand, adjust the click stop turret and the microphone so that the tip
sits two finger- widths from the corner of your mouth. (To prevent breath noise, avoid
putting the microphone in front of your mouth.)
3.2 Carefully bend and shape the boom with both hands as shown. Avoid bending or
twisting the boom near the microphone or earpiece.
2.1
2
4.1 4.2
4
2. Adjust the headband
To adjust the headband, lengthen or shorten
the band until it fits comfortably. The click stop
feature keeps the headband securely adjusted.
Position the headset receivers so that the foam
cushions sit comfortably over the centre of your
ears.
2.1 Adjust to fit.
4. Connect headset
Quick Disconnect TM connector (not available on D261N USB Stereo)
This feature allows you to place a call on hold and move away from the phone without
removing the headset. When you separate the Quick Disconnect, you place an ongoing
conversation on hold.
4.1 Before using your headset, join the Quick Disconnect to the mating connector of the
modular adapter cable.
To put your call on hold, grasp Quick Disconnect, as shown, and pull straight apart. To
resume your conversation, reconnect the halves.
2"
50.8 mm
3.2
3
3.3
3.4
3.1
Front Back