Desk phone: connect and call, Choose desk phone setup – Plantronics Savi W730-M User Manual

Page 11

Choose a desk phone setup

A, B or C

and connect cables.

Desk phone (standard)

USE

• Connect one end of the telephone interface cable to the back of the base

• Disconnect the handset coil cord from the base of the desk phone and re-connect it to the

telephone interface cable junction box.

• Finally, connect the remaining end of the telephone interface cable into the open handset

port on the desk phone.

NOTE

If your phone has a built-in headset port, you should only use the headset port if you will

not be using the HL10 lifter. In this configuration, you must press both the headset button on your
phone and the call control button on the headset to answer or end calls.

Desk phone + HL10 lifter (sold separately)
See the user guide at

plantronics.com/accessories

for details.

USE

Desk phone + EHS cable (sold separately)
See the user guide at

plantronics.com/accessories

for details.

USE

Desk phone: connect and call

Choose desk phone setup