Plantronics ML20 - Manual (Page 2)

2
TAKE A GOOD LOOK
CALL BUTTON
• Take a call or end it (1 tap)
• Redial (2 taps)
• Initiate phone’s voice-dialing
(2 second press until tone is heard)
• Reconnect lost Bluetooth connection
(1 tap if the headset doesn’t
automatically reconnect)
• Activate pairing mode after initial set
up (press until LED flashes red/blue)
POWER SWITCH
• On (slide to reveal black)
• Off (slide to reveal red)
MICRO USB CHARGING PORT
• Charge:
1 hour before first use
2 hours (for full charge)
• Do not use headset while charging
VOLUME BUTTON
• Volume presets (1 tap per level change)
LED
• Charging (solid red)
• Low battery (3 red flashes at
powering on)
• Pairing mode (repeating red/blue
flashes)
Be safe! Please read the safety
guide for important safety, charging,
battery and regulatory information
before using your new headset. Your headset may look slightly
different than the illustration,
but will still work as described.