JVC NX-PB10 - Manual (Page 6)

6
Setting the clock
You can set the clock only when the System is turned off
(on standby).
1
Show the clock setting display.
2
Adjust the hour and minute.
• The clock may gain or lose 1 to 2 minutes per
month. You may need to readjust the clock
periodically.
• To check the current time while the System is turned on,
press CLOCK/SLEEP.
• If there is a power failure, the clock loses its settings. You
need to set the clock again.
Locking disc/iPod door
You can lock the disc/iPod door to prevent it from opening
by accident.
While the disc/iPod door is closed...
On the main unit:
Sleep Timer
You can set Sleep Timer only when the System is turned
on.
1
Show the Sleep Timer setting display.
2
Specify the shut-off time.
• To check the remaining time until the System shuts off,
press and hold CLOCK/SLEEP.
Common operations
(Hold) (Hold)
(Canceled)
(Hold at the same time)
(Scrolled on the display)
EN_NX-PB10[B].indb 6 EN_NX-PB10[B].indb 6 10.9.3 2:39:50 PM 10.9.3 2:39:50 PM