JVC KD-LH911 - Manual (Page 9)

9
ENGLISH
Setting the clock
1
Enter the PSM menu (see page 5).
2
Set the hour, minute, and clock
system.
1 Select “Clock Hr” (hour), then
adjust the hour.
2 Select “Clock Min” (minute), then
adjust the minute.
3 Select “24H/12H,” then select
“24Hours” or “12Hours.”
3
Exit from the setting.
To check the current clock time when the
power is turned off
Canceling the display
demonstrations
If no operations are done for about 20 seconds,
display demonstration starts.
[Initial: Demo]—see page 34.
1
Enter the PSM menu (see page 5).
2
Select “Off.”
• Make sure “Demo/Link” is shown
on the display. If not, press 5 or ∞ .
3
Exit from the setting.
To activate the display demonstration
In step 2 above, select “Demo” or
“Image Link.” For more details, see page 34.
EN08-13_LH911[EX_EU]f.indd 9 EN08-13_LH911[EX_EU]f.indd 9 1/7/05 6:56:54 PM 1/7/05 6:56:54 PM