Waterproof function, Maintenance after use, Wirelesslan – JVC GC-XA1 BE User Manual
Page 4
Waterproof Function
This camera is equipped with a waterproof function.
This camera can make recordings in marine water and fresh water.
We recommend to select [Blue(marine)]/[Green(marine)] in White Balance for underwater
scene.
The waterproof is tested in accordance with JVC test standard and it does not assure damage-
free or trouble-free operation.
The waterproof cannot be guaranteed if the camcorder is subject to impact.
Consult with the dealer if the camcorder is subject to impact.
Water proof Function : IEC Standard publication 529 IPX8.
• The cover for the ports must be firmly closed.
• Do not use this product in water deeper than 5m.
• Do not use in the following locations:
Place with higher water pressure than specified, in hot springs or water of 40°C or higher.
• Supplied accessories are not waterproof.
■ Malfunction due to water immersion (IPX8 5m, 30minutes) and other damages caused by
misuse by the customer is not covered by warranty.
Before use, be sure to read the “Detailed User Guide” in the built-in memory with the
camcorder.
— Maintenance After Use —
•After use in water or a dusty environment,
rinse the camera as soon as possible with still fresh water in basin.
•Always keep the lens clean and wipe the water droplets off the camera with a soft and dry
cloth.
•Air-dry the camera completely in a shaded area.
■ The waterproof of the ports are not guaranteed in all environments or conditions.
(IPX8 5m, 30minutes)
Dear Customer, [European Union]
This apparatus is in conformance with the valid
European directives and standards regarding
electromagnetic compatibility and electrical safety.
European representative of JVC KENWOOD Corporation
is: JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany
Cautions
A copy of the Declaration of Conformity with regard to
the R&TTE Directive 1999/5/EC can be downloaded
from the following Web sites.
http://www3.jvckenwood.com/ecdoc/
Hearby, JVC declares that this unit GC-XA1BE is in
compliance with the essential requirements and
other relevant provision of Directive 1999/5/EC.
This unit GC-XA1BE is made in China.
WirelessLAN
˙
This device is a 2.4 GHz wideband transmission system
(transceiver), intended for use in all EU member states
and ETFA countries, except in France and Italy where
restrictive use applies.
˙
In Italy the end-user should apply for a license at
the national spectrum authorities in order to obtain
authorization to use the device for setting up outdoor
radio links and/or for supplying public access to
telecommunications and/or network services.
˙
This device may not be used for setting up outdoor
radio links in France and in some areas the RF output
power may be limited to 10mW EIRP in the frequency
range of 2454 - 2483.5 MHz For detailed information
the end-user should contact the national spectrum
authority in France.
Information for Users on
Disposal of Old Equipment
[European Union only]
This symbol indicates that the product with this symbol should not be
disposed as general household waste.
If you want to dispose of this equipment, please do not use the
ordinary dust bin! There is a separate collection system for these
products.