JVC KD-LHX552 - Manual (Page 13)

13
ENGLISH
6
Repeat steps 3 to 5 to store other
PTY codes into other preset
numbers.
7
Exit from the setting.
Using the standby receptions
TA Standby Reception
TA Standby Reception allows the receiver to
switch temporarily to Traffic Announcement
(TA) from any source other than AM.
• If a station starts broadcasting a traffic
announcement, “Traffic News” appears on the
display, and this receiver temporarily tunes
in to the station. The volume changes to the
preset TA volume level (see page 33).
To activate TA Standby Reception
• If the TP indicator lights up, TA Standby
Reception is activated.
• If the TP indicator flashes, TA Standby
Reception is not yet activated. (This occurs
when you are listening to an FM station
without the RDS signals required for TA
Standby Reception.)
To activate TA Standby Reception, tune in to
another station (or service) providing these
signals. The TP indicator will stop flashing
and remain lit.
Storing your favorite programmes
You can store six favorite programme types.
Preset programme types:
1
2
3
Select a PTY code.
4
Select a preset number.
5
Selected PTY code is stored in the selected
preset number.
To be continued....
TP indicator appears.
EN08-15_LHX552_1[EX_EU]f.indd 13 EN08-15_LHX552_1[EX_EU]f.indd 13 12/2/04 10:40:11 AM 12/2/04 10:40:11 AM