Driving to your destination – HONDA 2012 CR-Z Navigation User Manual
Page 49

48
Navigation System
CR-Z_KA 31SZT810
Viewing the Routes
Touching 
View Routes on the
Calculate route to screen allows you to 
scroll through and view the various 
routes (Direct, Easy, Maximize 
Freeways, etc.) to your destination. If 
you select 
View Routes, the display
changes to:
NOTE:
• You may only view routes as shown 
above from the
Calculate route to
screen.
• The selected route method is shown at
the top of the screen.
• It may take several minutes (the
system displays an hourglass while it 
is calculating) to show all route 
methods, and it is not unusual for the 
different methods to pick the same 
route. Voice commands cannot be 
used while the system is calculating.
• If the trip is greater than 100 miles,
then “Minimize Freeways” and 
“Minimize Toll Roads” may be 
grayed out. This is normal.
Say or select
Summary to display the
distance and time to go for each route. 
Based on the route data, you can change 
the routing by using the 
Next and Prev.
buttons. Once you confirm your 
selection, say or select 
OK on the
screen.
NOTE:
Distances and times shown for each 
method in the Summary are 
approximate.
After calculating the route with the new 
method, the system displays a map of 
your current location. The calculated 
route will be highlighted as a blue line, 
and a voice prompt will tell you how to 
proceed along the highlighted route. 
Touch 
VOICE to have the guidance
repeated.
Driving to Your Destination
00 CR-Z_KA.book 48 ページ 2011年8月9日 火曜日 午後4時17分
