Installing a child seat – HONDA 2012 Ridgeline User Manual
Page 53

Lift the head restraint (see page
), then route the tether strap
over the seat-back and through
the head restraint legs.
Lift the cover, then route the
tether strap around the upper
guide. Route the tether strap
downward properly, making sure
the strap is not twisted, then
attach the strap hook to the tether
anchor on the outside of the seat
bottom (see page
).
Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
Tighten the strap according to the
seat maker’s instructions.
6.
7.
8.
48
123
On the outer seating position
Installing a Child Seat
Dr
iv
er
and
P
asseng
er
Saf
e
ty
45
Outer Position
Center Position
TETHER ANCHOR
TETHER ANCHOR
UPPER GUIDE
UPPER GUIDE
11/09/14 17:38:32 31SJC660_052
This manual is related to the following products: