System setup, 2010 accord – HONDA 2010 Accord Navigation User Manual
Page 92
92
Navigation System
System Setup
After selecting the choice, a
map
screen
will be displayed.
Rotate the
Interface Dial knob
to
select the map scale (available scales are
1/20, 1/8, and 1/4 mile scales). Use the
Interface Dial
to move the crosshairs
(red circle) to the desired start point and
push in on the
Interface Dial
to “set”
the start point. Then move the
Interface Dial
in a straight or diagonal
direction to encompass the area to be
avoided.
NOTE:
The maximum size of the “Avoid area”
is 1/4 of the navigation display screen
regardless of the map scale setting.
The selected area will be displayed as a
shaded box with a yellow border. Push
in on the
Interface Dial
to set the end
point of the avoided area.
To “redraw” the area, select
CANCEL
and repeat the area selection process.
Say or select
DONE
to return to the
Edit avoid area
screen.
If your selected area contains a freeway,
the system will prompt you with a pop-
up box saying “Do you want to avoid
freeways?” Answering “No” allows you
to enter a route through an avoided area
on a freeway and skip the “Avoid area
caution box” (see Pop-Ups and
Disclaimers on page
When you return to the
Edit avoid area
screen, the “Vicinity” field is
automatically filled in by the system.
Re-edit the area “Name” if desired.
Select
Done
on the
Edit avoid area
screen to finish editing. Your new
avoided area will now appear on the
“Avoid area” list and be viewable on the
map
screen.
2010 Accord