HONDA 2011 Ridgeline - Manual (Page 370)

Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to: Place the flat tire face up on the
tire tray.
Remove the spacer cone from the
wing bolt, turn it over, and put it
back on the bolt.
Secure the flat tire by screwing
the wing bolt back into its hole.
Release the tire tray and slide it
back in place.
Tighten the tire tray holding bolts
securely.
Remove the center cap from the
flat tire.
18.
19.
20.
21.
22.
23.
24.
On RTS, RTL, and Canadian VP, EX-L
models
Changing a Flat Tire
366
WING BOLT
SPACER CONE
For normal
tire For spare
tire
94 lbf·ft (127 N·m , 13 kgf·m)
10/04/19 16:26:47 31SJC650_371
2011 Ridgeline