HONDA 2011 Fit - Manual (Page 93)

2. Turn the ignition switch to the ON
(II) position, and make sure to
close the driver's door.
3. Push and hold the rear of the
master door lock switch on the
driver's door. You will hear a click.
Continue to hold the switch:
●
Until you hear another click
(after about 5 seconds) to
activate
driver's door unlock
feature .
● Or, until you hear two more
clicks (after about 10 seconds)
to activate
all doors and tailgate
unlock feature .
4. Release the switch, and within 20
seconds, turn the ignition switch to
the LOCK (0) position.
To program the Ignition Switch
Unlock mode:
Unlocks the driver's door or all doors
and tailgate when the ignition switch is
moved out of the ON (II) position.
1. Make sure the shift lever is in the
Park (P) position (A/T vehicles).
2. Turn the ignition switch to the ON
(II) position, and make sure to
close the driver's door.
3. On A/T vehicles, push and hold the
brake pedal, then move the shift
lever out of the Park (P) position.
4. Push and hold the rear of the
master door lock switch on the
driver's door. You will hear a click.
Continue to hold the switch:
●
Until you hear another click
(after about 5 seconds) to
activate
driver's door unlock
feature .
● Or, until you hear two more
clicks (after about 10 seconds)
to activate
all doors and tailgate
unlock feature .
5. Release the switch, and within 20
seconds, turn the ignition switch to
the ACCESSORY (I) position.
On
A/T vehicles, move the shift lever to
the Park (P) position.
6. Turn the ignition switch to the
LOCK (0) position.
Even if your vehicle's battery is
removed or goes dead, the system
keeps the auto door lock/unlock
setting which you selected.
A/T models
Door Locks
87
Instruments
and
Controls
10/08/06 13:54:35 11 FIT MMC North America Owner's Manual 50 31TK6620 enu