FIAT Freemont - Manual (Page 211)

4. Rotate the applicable bulb's electrical connector 1 ∕
4
turn counterclockwise and remove it from the tail-
lamp housing.
5. Remove the bulb from the connector socket and
install the replacement bulb.
6. Install the bulb and connector assembly into the
taillamp housing and rotate the connector 1 ∕
4
turn
clockwise to lock it in place.
7. Reinstall the taillamp housing and fasteners.
Changing the Backup Lamp
1. Open the liftgate.
2. Remove the two fasteners retaining the taillamp
housing to the liftgate from the inboard face of the
liftgate. (fig. 158)
3. Carefully insert a trim stick (plastic flat-blade tool)
between the taillamp housing and the liftgate. Use
the trim stick and hand pressure together to disen-
gage the taillamp housing from the liftgate.
(fig. 159)
(fig. 157)
(fig. 158)
(fig. 159)
204
KNOWING
YOUR
VEHICLE
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND
CARE
TECHNICAL
SPECIFICATIONS
CONTENTS