FIAT Freemont - Manual (Page 248)

FLUIDS, LUBRICANTS, AND GENUINE PARTS
ENGINE
Component Fluids, Lubricants, and Genuine Parts
Engine Coolant – 2.0L Diesel Engine
Exceeds CUNA NC 956-16, ASTM D 3306 specifications. Qualification FIAT
9.55523 (PARAFLU UP* Contractual Technical Reference No. F101.M01) –
Usage ratio: 50% water 50% PARAFLU UP
Engine Oil – 2.0L Diesel Engine
Grade SAE 5W-30 fully synthetic lubricant that meets Qualification FIAT
9.55535-S1 (SELENIA WR P.E. Contractual Technical Reference No.
F510.D07)**
Fuel Selection – 2.0L Diesel Engine 50 Cetane or higher (Less than 15 ppm Sulfur).
Fuel Additive – 2.0L Diesel Engine
Diesel antifreeze additive with protective action for diesel engines (TUTELA
DIESEL ART Contractual Technical Reference No. F601.L06) – Add 25 cc for
every 10 liters of diesel fuel.
* When the engine is used under particularly harsh
climate conditions, we recommend using a 60% mix-
ture of PARAFLU UP and 40% demineralized water. Do
not add or mix with other fluids with different specifi-
cations to those described ** For diesel engines, in emergency situations where
genuine products are not available, it is acceptable to
use lubricants with at least ACEA C2 performance. If
this happens, optimum engine performance is not guar-
anteed and it is recommended that the lubricant is
replaced as soon as possible with recommended lubri-
cants at your FIAT dealership. Use of products with
specifications below ACEA C2 in diesel engines could
cause damage to the engine that is not covered by the
warranty.
242
KNOWING
YOUR
VEHICLE
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND
CARE
TECHNICAL
SPECIFICATIONS
CONTENTS