FIAT Punto - Manual (Page 259)

258
SAFETY DEVICES
CORRECT USE OF THE CAR
W
ARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
INDEX
DASHBOARD
AND
CONTROLS
TECHNICAL
SPECIFICA
TIONS
WHEELS
RIMS AND TYRES
Pressed steel or alloy rims. Tubeless tyres with radial carcass. The
homologated tyres are listed in the Log book.
IMPORTANT In the event of discrepancies between the information
provided on this “Owner handbook” and the “Log book”, consider the
specifications shown in the log book only.
Attaining to the prescribed size, to ensure safety of the car in movement,
it must be fitted with tyres of the same make and type on all wheels.
IMPORTANT Do not use inner tubes with Tubeless tyres.
SPACE-SAVER SPARE WHEEL
Pressed steel rim. Tubeless tyre.
WHEEL GEOMETRY
Front wheel toe-in measured from rim to rim: 0 ±1 mm.
The values refer to the car in running order.
UNDERSTANDING TYRE MARKING
Example: 185/60 R 14 82 H
185 = Nominal width (S, distance between sidewalls in mm).
60 = Percentage height/width ratio (H/ S).
R = Radial tyre.
14 = Rim diameter in inches (Ø).
82 = Load rating.
H = Maximum speed rating.
F0I0034m
251-270 Punto GB 19-05-2009 11:19 Pagina 258