Enermax Platimax EPM1000EWT - Manual (Page 4)

2
ENERMAX Platimax Series Power Supply Specification
EPM1000EWT
AC Input Voltage
115-240VAC, 50-60Hz
(Maximum range: 103-264VAC, 47-63Hz)
AC Input Current 10.5-4.5A
DC Output
Rated Combined
3.3V 0-20A
100W
5V 0-20A
12V 0-83A 996W
-12V 0-0.5A 6W
5Vsb 0-3A 15W
Total Power 1000W
Peak Power* 1100W
Protection Circuit
Over Current Protection
DC Rail OCP trigger range
3.3V 30 – 40A
5V 30 – 40A
(DC)
Under Voltage / Over Voltage
Protection
DC Rail UVP trigger range OVP trigger range
3.3V 2.0 – 2.4V 3.9 – 4.5V
5V 3.3 – 3.7V 5.7 – 6.5V
12V 8.5 – 9.5V 13.3 – 14.5V
Over Power Protection Activated when output power > 120 ~150% of rated max load.
Over Temperature Protection Activated when PSU heat sink > 90 ~ 120 o C.
Short Circuit Protection Activated when any DC rails short-circuited.
ENVIRONMENT
Temperature
Operation ambient: 0~50 o C
Storage ambient: -40~70 o C
Humidity
Operation: to 85% relative humidity, non-condensing at 25 o C
Storage: to 95% relative humidity, non-condensing at 50 o C
OTHERS
MTBF
> 100,000 hours at 70% of full rated load, 230VAC/50Hz, 25 o C
(MIL-HDBK-217F standard)
Dimension 150 (w) x 86 (h) x 175 (d) mm
Weight 2.25kg (without modular cables) ±50g
Safety UL/cUL(Level 6), TUV, GOST, CB, BSMI
EMC CE, FCC, KCC
* Peak power may last up to 60 seconds.