Package contents – Eizo FlexScan S1901 User Manual
Page 5
3
English
Package Contents
Check that all the following items are included in the packaging box. If any items are missing or damaged, contact your local dealer.
NOTE
• Please keep the packaging box and materials for future movement or transport of the monitor.
For each item below, please refer to page i.
1 Monitor
2 Power cord
3 EIZO LCD Utility Disk (CD-ROM)
• User’s Manual, Specifi cations Sheet
4 Setup Manual (this manual)
5 Limited warranty
6 Fixing screws: M4 × 12 mm 4PCS
(for another manufacturer's arm or stand)
7 Digital signal cable (FD-C39)
8 Analog signal cable (MD-C87)
9 Stereo mini jack cable*
1
10 Cable holder (EZ-UP stand)
Installation/storage of the monitor with EZ-UP stand
If you have purchased the monitor with EZ-UP stand, please perform the following procedures when installing and
storing..
Installing the monitor
To install the monitor, lift the monitor in the arrow
direction by holding the panel portion with both hands,
until you may hear the “click”. If it clicks, the monitor
stand lock is surely functioned to use the monitor.
Storage the monitor
Slide the “Unlock” knob upwards to release the lock.
Lower the panel on the monitor backwards and store the
monitor in a folded position.
Caution
• Do not use the EZ-UP stand when folded.
• After releasing the lock, take care not to catch your fi ngers when lowering the monitor. This may cause
injury or damage the monitor.
*
1
Speaker applied model