TIMBERK THU UL 09 series - Manual (Page 6)

6
able 2.
Possible reason
The appliance works in
soft mode (low diffusion
frequency)
The diffuser is clogged
Poor plugging
Sediments on the
membrane
Deteriorated properties of
the water filter
Stale water is used
There are residues of stale
water or garbage in the
groove for water or in the
diffuser
Failure
Poor diffusion
(insufficient capacity)
No diffusion
White bloom on objects
around the appliance (salts
from water)
Steam with unpleasant
smell
Correction method
There is no failure.
If it is necessary to switch to heavy mode, turn the
controller knob to the extreme right position.
Clean the diffuser
Plug the appliance accurately
Clean the membrane with a special brush
Replace the water filter
Clean the appliance in accordance with cleaning and
maintenance instructions and fill it with fresh water
www.timberk.com electric humidifier