Fig. 2 power supply/remote turn-on connection – SoundMax SM-SA6021 User Manual

Page 8

Text mode
Original mode

SOUNDMAX

SM-SA6021

FIG. 2 POWER SUPPLY/REMOTE TURN-ON CONNECTION

(1) Terminal for +12V battery voltage
(2) REM terminal for remote turn-on

(3) GND terminal for the ground, to the battery negative pole
(4) Battery
(5) Cable fuse
(6) Remote turn-on line

If your car is not equipped with Remote turn-on line connection, connect this cable plus pole (+)
to the ignition lock. An on/off switch should be inserted in this case. Make sure that this switch is
turned off if the amplifier is not used.

Fig.2

Note: Place the fuse in the power supply lead as close as possible to the car battery.