SoundMax SM-CMD5003 - Manual (Page 16)

16
System setup
When you select SETTING mode or press SETUP button on the RC,
the menu will be displayed, in which you can touch any item to
perform operations as follows:
1. Menu page list. Touch any page icon to go to corresponding menu
page.
2. Setting list. Touch a setting to select its adjustment.
3. Adjustment buttons.
4. Option selection button. Touch to go to option list for
corresponding setting. Touch an option to select it.
5. Subpage number.
6. Subpage selection button. Touch to switch between subpages of
each setting list.
You can also navigate in the menu by pressing cursor buttons on the RC and confirm your selection by
pressing ENTER button on the RC.
Sound page
EQ: Select Flat, Classic, Pop, Rock or User equalizer mode.
Bass: Adjust the low-frequency level.
Treble: Adjust the high-frequency level.
Balance: Adjust the balance between left and right channels.
Fader: Adjust the balance between front and left channels.
Volume: Adjust the sound volume level.
Beep: Select ALL (beep is heard at any button pressing), 2ND (beep is heard when a button is pressed
and held) or OFF (no beep).
Loud: Selecting loudness ON will emphasize the low frequency output.
Subwoofer: set the subwoofer on or off.
Display page
Screen: Select 16:9, 4:3 or FULL screen modes.