SoundMax SM-CDM1047 User Manual
Page 16
16
er setting
and hold SEL button; then press it repeatedly until DSP OFF (DSP ON) is displayed. Rotat
the front panel or press VOL+/VOL- buttons on the RC to choose between sound effects:
K M => CLASSICS => FLAT => DSP OFF.
BEEP function
Press and hold SEL button; then press it repeatedly until BEEP OFF (BEEP ON) is displayed. Rotate VOL
regulator on the front panel or press VOL+/VOL- buttons on the RC to select one of the following:
BEEP OFF – beep sound is not heard when a button is pressed
BEEP ON – beep sound is heard when a button is pressed
Reset function
RESET button is pressed with either a ballpoint pen or thin metal object. RESET function is to be activated for
the following reasons:
Initial installation of the unit when all wiring is completed.
All the function buttons do not operate.
Error symbol on the display.
AUX in jack
AUX-in jack is intended for connecting external audio equipment to amplify the sound. If connection is made
correctly, the audio signal from the external source will be translated through the acoustics of the head unit.
This enables to adjust the volume and quality of the sounding. For example, you can connect an MP3-player
to listen to tracks using the car acoustic system.