SoundMax SM-CCR3038 User Manual
Page 16
16
DISP button to switch between clock display and current mode display. Press and hold DISP
ll blink. Rotate VOL regulator clockwise or press VOL+ button to set hours; rotate VOL r
r press VOL- button to set minutes.
Loudness control
Press and hold SEL button, then press it repeatedly until LOUD ON is displayed. Rotate VOL regulator on the
front panel or press VOL+/VOL- buttons on the RC to select Loudness ON or OFF.
Equalizer setting
Press and hold SEL button; then press it repeatedly until DSP OFF (DSP ON) is displayed. Rotate VOL
regulator on the front panel or press VOL+/VOL- buttons on the RC to choose between sound effects: POP M
=> ROCK M => CLASSICS => FLAT => DSP OFF.
AUX in jack
AUX-in jack is intended for connecting external audio equipment to amplify the sound. If connection is made
correctly, the audio signal from the external source will be translated through the acoustics of the head unit.
This enables to adjust the volume and quality of the sounding. For example, you can connect an MP3-player
to listen to tracks using the car acoustic system.