SoundMax SM-CDM1043 - Manual (Page 14)

14
Loudness
Press SEL button repeatedly until the display shows LOUD ON (LOUD OFF). Rotate VOLUME knob to select
between LOUD ON/LOUD OFF. LOUD function is to emphasize the bass output; the word LOUD ON indicates
that the LOUD mode is on.
Clock setting
The clock can be set anytime when the power is on. Press PTY/CLK button (in radio mode - press and hold
the button) and then press and hold the button for 2 seconds, the time indication will blink on the display.
Rotate VOLUME knob to adjust hours. Press SEL button to go to minute setting. Rotate VOLUME knob to
adjust minutes. Press PTY/CLK button again or leave the unit idle for the new setting to take effect.
Press PTY/CLK button (in radio mode press and hold the button) to view the time display.
AUX in jack
AUX-in jack is intended for connecting an external audio or video equipment to amplify the sound. If
connection is made correctly, the audio signal from the external source will be translated through the
acoustics of the head unit. This enables to adjust the volume and quality of the sounding. For example, you
can connect an MP3-player to listen to tracks using the car acoustic system.