Powe r selection, Installation and connection – SoundMax SM-LCD811 User Manual
Page 6

6
2.
Car adaptor: The car adaptor (please use the included device only)
allows the TV to be powered by a car battery through the vehicle's
cigarette lighter.
Installation and connection
Installation of Stand:
Insert the fixing part of the stand into the gutter of the bracket on the rear of
the unit. Tighten the plastic fixing screw.
Connection of power supply:
Insert the plug of the Power adaptor or Car adaptor into the power jack of the
unit. Connect the adaptor to the power source.
Earphone connection:
Connect the earphone plug to the phone (line in) jack of the unit.
Note: If earphone is applied, the sound only transmits through the earphone,
and no sound is available from the speaker of the TV set.
Connection of external antenna:
Insert one end of the external TV antenna or cable antenna cord plug to the
antenna jack of the unit.
Connection of audio-video jack:
Insert one end of the included audio-video cable into the Audio/video in
(MMI) jack of the unit. Connect the other ends of the cable (yellow for
video/red and white for audio) to corresponding terminals of an external
device, such as VCD or DVD player etc.
In order to receive a clearer picture
Adjust the length, angle and direction of the telescopic antenna to obtain
optimum image. Collect the antenna after usage.