SoundMax SM-2408 User Manual

Page 6

Press SKIP- button once to skip back to the beginning of the previous track. Press and hold this button

to search for a particular point at high speed backward. Release the button to resume normal play.

Press FOLDER+/FOLDER- buttons to move to 10 tracks forward or backward. If your disc contains

folders, press and hold these buttons to select the next or previous folder.

Playback modes

Press MODE button repeatedly to switch between different playback modes.

During playing the mode will change as below:

For CD playback: Repeat current track => Repeat all tracks => Normal playback.

For MP3 playback: Repeat current track => Repeat current folder => Repeat all tracks => Normal.

Program mode

Up to 99 MP3 tracks or 20 CD tracks can be programmed for disc play in any order.

Before use, be sure to stop the disc by pressing STOP button. Press MODE button. The set is now in

memory programming mode, at the first memory position. “PROGRAM” will be blinking on the display.

Select a desired track by using SKIP- and SKIP+ buttons.

Press MODE button. The set will advance to next memory position.

Repeat the 2 last steps described above to enter additional memories into the program if necessary.

After a maximum of 99 MP3 tracks or 20 CD tracks (or less) have been selected as described above, the

display will show FULL. Press PLAY/PAUSE button to start playing the programmed tracks. “PROGRAM” will

be shown on the display.

Use SKIP- and SKIP+ buttons to skip to the previous or next programmed track. The program memory

will be cleared when you press STOP button or turn off the CD-player or power supply.

Note: Good quality sound is guaranteed only when playing licensed discs.

USB/SD/MMC operation

This unit is equipped with a USB socket compatible with USB drives of 1.1 and 2.0 versions up to 16 Gbs.

The unit also can play files contained in SD/MMC memory cards up to 16 Gbs.

Remove the disc from the disc compartment and close the compartment door. Lift the plastic cover on

the front panel and insert a USB or an SD/MMC card into the corresponding slot. Set the function switch

to CD/MP3/USB/SD position.

If there is a disc and a USB/memory card in the unit at the same time, the unit will start reading the

disc by default. Press and hold PLAY/PAUSE button repeatedly to select between the storages in the

following order: DISC => USB => SD/MMC.