SoundMax SM-CMD3015 User Manual

Page 20

Mono/Stereo control (in FM radio mode)

Press repeatedly SELECT button on the panel or SEL button on the RC until the display shows ST ON (ST

OFF). Press VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to select between ST

ON/OFF. ST ON means stereo reception of the signal; ST OFF means mono reception mode. Or press

STEREO button on the RC or touch MO/ST icon on the screen to switch stereo reception on/off.

Improvement of reception of distant stations can be done by selecting mono mode, which may cut down

some reception noise.

Local radio station search

Press repeatedly SELECT button on the panel or SEL button on the RC until the display shows LOC ON (LOC

OFF). Press VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to select between LOC

ON/OFF. LOC ON means that only local stations are received; LOC OFF means that both local and distant

stations with weak and strong signal are received. Or press LOCAL button on the RC or touch LOC/DX icon

on the screen to switch between local and distant station reception.

RDS function

RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not

available in you area, the following service is not available, either.

AF (Alternative Frequencies) function

Press AF button on the panel or touch AF icon on the screen to turn the AF function on or off. When the

function is on, AF symbol will blink on the display.

When the radio signal strength is poor, enabling the AF function will allow the unit to automatically search

another station with the same PI (Program Identification) as the current station but with a stronger signal,

so that you do not have to retune the stations when driving between different transmitter coverage areas.

PS (Program Service name): the name of station will be display instead of frequency.

If RDS service is not available in your area, turn off the AF mode.

TA (Traffic Alarm) function

Press TA button on the panel or touch TA icon on the screen to turn TA function on or off. When on, the TA

symbol will show on the display.