3 - preparing your skin, 4 - plugging in the appliance, 5 - disconnecting the appliance – ROWENTA FASHION EP1040 User Manual
Page 8: 6 - epilating, 7 - epilation in sensitive areas
8
• This appliance is not designed for use by people (including children)
with impaired physical, sensory or mental capacities, or by persons without the neces-
sary experience or knowledge, unless they are assisted by a person who is responsible
for their safety, are supervised or have been first given instructions concerning the use
of the device. Make sure that children do not play with the appliance.
• Do not leave the appliance with unaccompanied children.
• Do not use extension leads.
• Never use the appliance if your hands are wet.
• Do not expose the appliance to direct sunlight.
• Do not use the appliance in very low temperatures.
• Do not let into contact with or immerse the appliance in water.
• Do not use corrosive products or solvents for cleaning the appliance.
Guarantee
Your appliance is intended for home and personal use only. It may not be used for pro-
fessional purposes. In the event of improper use the guarantee will become null and void.
3 - Preparing your skin
Your skin must be clean and dry.
• Do not use any cream or moisturiser before your start the epilation.
• If you used to remove hair growth using a razor:
• On the first few times that you remove hair growth, you may feel that your skin is more
sensitive, because the hair growth will have become thicker and tougher as a result of
using a razor. This feeling will diminish as you start using your epilator: the hairs will
grow back less vigorously and will become finer.
• Your epilator will be more effective and easier to use if you use it regularly.
We recommend that you start epilating as soon as the hairs start coming through again.
4 - Plugging in the appliance
(fig.1)
5 - Disconnecting the appliance
(fig.2)
6 - Epilating
• To get the best out of your epilator we recommend that you tilt it slightly towards your
skin, in the direction you’re going to epilate, as shown in the diagram (fig. 3).
• Push the switch to “2”. The switch should always be facing you during use (fig. 4).
• Epilate against the direction of hair growth, slowly and without applying pressure.
7 - Epilation in sensitive areas
• For the best possible epilation we recommend that you place your epilator lightly up
against the skin, in the direction you’re going to epilate, as shown in the diagram (fig. 3).
• Preparing the area to be epilated:
- Pre-cut the hairs which are too long, more than 1 cm in length.
IFU_EP1030_1040_1800119662_RO 20/10/10 10:03 Page8