Sony SLV-KH7ME - Manual (Page 9)

11 Getting Started
Getting Started
1
Press ON/STANDBY to turn on the unit.
2
Press INPUT SELECT until “L2” appears in the display window.
3
Turn on your TV and select a programme position for the video
playback.
Choose a channel between UHF 30 and 39 on the TV, where there is
no picture and no sound or only a steady rustling sound. This
channel will now be referred to as the video channel.
4
Tune the TV so that a blue screen appears on the TV screen.
Refer to your TV manual for tuning instructions.
You have now tuned your TV to the unit. From now on, whenever
you want to play a tape, set the TV to the video channel.
If the blue screen does not appear clearly, see “To obtain a clear blue
screen” on page 10.
Step 4
Tuning your TV to the unit
If you have connected the unit to your TV using the audio/video cable, skip
this step.
continued
ON/STANDBY
INPUT SELECT
ON/STANDBY
INPUT SELECT