beautypg.com

Troubleshooting assistance, Assistance, Malfunctions – Indesit TAN 5 FNF S User Manual

Page 16: Possible causes / solutions

background image

16

GB

Before calling for Assistance:

• Check if the malfunction can be solved on your own (see Troubleshooting).

• If after all the checks, the appliance still does not operate or the problem persists, call the nearest Service Centre

Communicating:

• type of malfunction

• appliance model (Mod.)

• serial number (S/N)

This information can be found on the data plate located

on the bottom left side of the refrigerator compartment.

Never call on unauthorized technicians and always refuse spare parts which are not originals.

Mod.

RG 2330

TI

Cod.

93139180000 S/N 704211801

220 - 240 V-

50 Hz

150 W

W

Fuse

A

Max 15 w

Total

Gross
Bruto
Brut

Compr.

Kompr.

Syst.

R 134 a

kg 0,090

Gross
Bruto
Brut

340

Net
Util
Utile

Gross
Bruto
Brut

Freez. Capac

Poder de Cong

75

Made in Italy 13918

Test

P.S-I.

Pressure
HIGH-235

LOW 140

kg/24 h

4,0

Class

Clase

N

Classe

model

serial number

Troubleshooting

Assistance

195061244.00

12/2006

If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list.

Assistance

Malfunctions:

The internal light does not

illuminate.

The refrigerator and the freezer do

not cool well.

The food inside the refrigerator is

beginning to freeze.

The motor runs continuously.

The appliance makes a lot of noise.

Some of the external parts of the

refrigerator become hot

Possible causes / Solutions:

• The plug has not been inserted into the electrical socket, or not far enough

to make contact, or there is no power in the house.

• The doors do not close properly or the seals are damaged.

• The doors are opened too frequently.

• The TEMPERATURE ADJUSTMENT knob is not in the correct position

• The refrigerator or the freezer have been over-filled.

• The TEMPERATURE ADJUSTMENT knob is not in the correct position.

• The door is not closed properly or is continuously opened.

• The outside ambient temperature is very high.

• The appliance has not been installed on a level surface (see Installation).

• The appliance has been installed between cabinets that vibrate and make

noise.

• The internal refrigerant makes a slight noise even when the compressor is

off. This is not a defect, it is normal.

• These raised temperatures are necessary in order to avoid the formation of

condensation on certain parts of the product.

This manual is related to the following products: