GIGABYTE GA-MA790GPT-UD3H - Manual (Page 11)

- 11 - Hardware Installation
Internal  1 x 24-pin ATX main power connector
Connectors  1 x 8-pin ATX 12V power connector
 1 x floppy disk drive connector

1 x IDE connector
 6 x SATA 3Gb/s connectors

1 x CPU fan header
 2 x system fan headers
 1 x power fan header
 1 x North Bridge fan header
 1 x front panel header

1 x front panel audio header
 1 x CD In connector

1 x S/PDIF In header
 1 x S/PDIF Out header
 3 x USB 2.0/1.1 headers
 2 x IEEE 1394a headers
 1 x serial port header
 1 x power LED header
 1 x chassis intrusion header

1 x clearing CMOS jumper
Back Panel  1 x PS/2 keyboard port or PS/2 mouse port
Connectors

1 x D-Sub port
 1 x DVI-D port (Note 2) (Note 3)
 1 x HDMI port (Note 3)
 1 x optical S/PDIF Out connector
 1 x IEEE 1394a port

6 x USB 2.0/1.1 ports
 1 x RJ-45 port

6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/
Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller

iTE IT8718 chip
Hardware Monitor  System voltage detection
 CPU/System temperature detection

CPU/System/Power fan speed detection
 CPU overheating warning
 CPU/System/Power fan fail warning
 CPU/System fan speed control (Note 5)