Ariston Aqualtis AQ7L 093 X - Manual (Page 7)

EN
7
Wash options
Super Wash
This option offers a high-
performance wash due to the
greater quantity of water used
in the initial phase of the cycle,
and due to the increased wash
cycle duration, is particularly
useful for the removal of
stubborn stains. It can be
used with or without bleach.
If you desire bleaching, insert
the extra tray compartment
(3) into compartment 1. When
pouring in the bleach, be careful not to exceed the
“max” level marked on the central pivot (see figure).
To bleach laundry without carrying out a full wash cycle,
pour the bleach into the extra compartment 3, select the
“Rinse” cycle and activate the “Super Wash” option .
! It cannot be used in conjunction with , , , , ,
, , .
Easy Iron
By selecting this option, the wash and spin cycles will be
modified in order to reduce the formation of creases.
At the end of the cycle the washing machine drum will
rotate slowly; the “Easy Iron” and START/PAUSE indicator
lights will flash. To end the cycle press the START/PAUSE
button or the “Easy Iron” button.
For the Silk wash cycle, the machine will end the cycle
while the laundry is soaking and the “Easy Iron” indicator
light will flash. To drain the water so that the laundry may
be removed, press the START/PAUSE button or the “Easy
Iron” button.
! It cannot be used in conjunction with , , , , .
Time Saver
If you select this option, the wash cycle duration will be
reduced by 30%-50%, depending on the selected cycle,
thereby guaranteeing simultaneous water and energy
saving. Use this cycle for lightly soiled garments.
! It cannot be used in conjunction with , , , , ,
, , , .
Extra rinse
By selecting this option, the efficiency of the rinse is
increased and optimal residual detergent removal is
guaranteed. It is particularly useful for skin which is
sensitive to detergents. We recommend this option is used
with a full load of washing, or when a large amount of
detergent is required.
! It cannot be used in conjunction with , , .
3
1
2
Wash cycles and options
Table of wash cycles
For all Test Institutes:
1) Test wash cycle in compliance with regulation 2010/1061: set wash cycle with a temperature of 60°C and 40°C.
2) Long wash cycle for cottons: set wash cycle with a temperature of 40°C.
3) Short wash cycle for cottons: set wash cycle with a temperature of 40°C.
1) Test wash cycle in compliance with regulation EN 60456: set wash cycle with a temperature of 60°C.
Icon Description of the wash cycle
Max. temp.
(°C)
Max.
speed
(rpm)
Detergent and additives
Max.
load
(kg)
Cycle
duration
Deter-
gent for
wash
Fabric
softener
Bleach
Cottons wash cycles
Cotton with pre-wash
(Add detergent to the relevant compartment).
90° 1000   - 7 190
Cotton (1): heavily soiled whites and resistant colours.
60°
(Max. 90°C)
1000    7 210
Cotton (1-2): heavily soiled whites and delicate colours. 40° 1000    7 205
Coloured Cotton (3) 40° 1000    7 100
Shirts 40° 600    2 70
Jeans 40° 800   - 4 70
Special programmes
Baby: heavily soiled delicate colours
40° 800    4 120
Durable Synthetics 60° 800    4 90
Delicate Synthetics 40° 800    4 70
"Bed & Bath" for bedlinen and towels. 60° 1000    7 140
Duvets: for down-stuffed garments. 30° 1000   - 3,5 120
Silk: for garments in silk and viscose, lingerie. 30° 0   - 2 65
Wool: for wool, cashmere, etc. 40° 600   - 2 55
Mix 30': to refresh lightly soiled garments quickly (not suitable
for wool, silk and clothes which require washing by hand)
30° 800   - 3,5 30
Partials wash cycles
Rinse
- 1000 -   7 40
Spin - 1000 - - - 7 15
Drain - 0 - - - 7 2
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to
factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
7
TR RU CH