Fein KBM80auto - Manual (Page 19)

19 en
en Original Instructions for Magnetic Core Drill Unit.
Symbols, abbreviations and terms used.
Symbol, character Explanation Symbol, character Explanation
Do not touch the rotating parts of
the power tool. Drilling capacity in steel - high
speed steel (HSS) (twist drill bit)
General prohibition sign. This
action is prohibited. Tap
Observe the instructions in the
text or graphic opposite! Max. twist drill bit diameter with
the supplied chuck
Make sure to read the enclosed
documents such as the Instruction
Manual and the General Safety
Instructions. Reamer diameter
Observe the instructions in the
text or graphic opposite! Counterboring diameter
Before commencing this working
step, pull the mains plug out of the
socket. Otherwise there will be
danger of injury if the power tool
should start unintentionally. Weight according to
EPTA-Procedure 01/2003
Use eye protection during opera-
tion. Low speed
Use ear protection during opera-
tion. High speed
Confirms the conformity of the
power tool with the directives of
the European Community. Magnetic holding power, sufficient
This sign indicates a possible dan-
gerous situation that could cause
severe or fatal injury. Magnetic holding power, insuffi-
cient
Worn out power tools and other
electrotechnical and electrical
products should be sorted sepa-
rately for environment-friendly
recycling. Switches the cooling-lubricant
flow on/off
Ø Diameter of a round part Starts the drill motor. Rotation
direction: clockwise
1st gear/2nd gear/3. gear Starts the drill motor in inch
mode. Rotation direction: anti-
clockwise
Drilling capacity in steel - TCT
(core drill bit) Speed reduction in steps
Drilling capacity in steel - high
speed steel (HSS) (core drill bit) Stops the motor
WARNING
Fe HM
Fe HSS
OBJ_BUCH-0000000008-001.book Page 19 Thursday, May 20, 2010 5:04 PM