Fein KBM65U - Manual (Page 25)

25 en
en Original Instructions.
Symbols, abbreviations and terms used.
Symbol, character Explanation
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Observe the instructions in the text or graphic opposite!
Observe the instructions in the text or graphic opposite!
Before commencing this work step, pull the mains plug out of the socket. Otherwise there will
be danger of injury if the power tool should start unintentionally.
Use eye protection during operation.
Use ear protection during operation.
Do not touch the rotating parts of the power tool.
Hot surface!
Do not reach in!
General prohibition sign. This action is prohibited.
Confirms the conformity of the power tool with the directives of the European Community.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environmental-friendly recycling.
1st gear/2nd gear
Tap
Steel
Low speed
High speed
Magnetic holding power, sufficient
Magnetic holding power, insufficient
Starts the drill motor. Rotation direction: clockwise
Starts the drill motor in inch mode. Rotation direction: anticlockwise
Speed reduction in steps
Speed increase in steps
Stops the motor
WARNING
OBJ_BUCH-0000000110-001.book Page 25 Wednesday, April 17, 2013 8:31 AM