Overview, For your safety – Fein RS 12-70E User Manual
Page 9

RS 12-70 E
9
EN
Operating instructions for pipe sander.
Overview.
1 Adjusting knob for speed selection
Gear setting using the electronic speed 
controller.
2 Switch
For switching ON/OFF.
3 Auxiliary handle
Always work using the additional 
handle.
4 Sanding belt
The sanding belt has three bearings.
The accessories described or illustrated in 
these operating instructions are not neces-
sarily included in the delivery of your power 
tool.
For your safety.
Before using this power tool, 
read and comply with:
these operating instructions,
the enclosed safety instructions 
(document number 3 41 30 054 06 1),
the relevant national industrial safety 
regulations.
These operating instructions and the 
enclosed safety information should be 
kept carefully for later use and enclosed 
with the power tool, should it be passed 
on or sold.
Intended use.
This power tool is intended for:
commercial use in industry and trade,
for sanding and polishing special steel 
pipes and nonferrous metals, using 
dry-sanding,
to removing paint, rust and oxide film,
for applications using the sanding tool 
and accessories given in these operating 
instructions, or those recommended 
by FEIN.
When treating metal, conductive dust can 
accumulate inside the machine. In such 
cases, blow out the motor space fre-
quently from outside using dry com-
pressed air and operate the power tool via 
a fault-current circuit breaker (actuating 
current 30 mA).
Safety instructions.
Risk of injury
Always work using the additional handle.
Provide for a secure stance; clamp the 
material to be worked firmly.
Only set the power tool onto the work-
piece when it is switched on.
After completing the work, first raise the 
power tool from the work piece and then 
switch it off.
Caution! Do not touch the sanding belt 
while it is running.
Only work with a sanding belt that is com-
pletely intact. Do not use any sanding belts 
that are worn-out or torn.
Protect persons and combustible objects 
from flying sparks.
Do not treat any materials that produce 
any particles that are detrimental to health 
(e. g. asbestos).
!
3 41 01 043 06 7 - Buch Seite 9 Mittwoch, 4. Februar 2004 11:07 11
