Edimax Technology HP-8500 - Manual (Page 7)

This screen shows that the installation was completed successfully. Click
on Finish to exit the wizard. Now its time to setup you hardware
connections please refer to the next diagrams.
Setup up the hardware
Plug your network cable into the computer’s RJ-45 network adapter port
Plug the other end of your network cable into the RJ-45 port locate at the
back
of the HomePlug Ethernet Bridge
Plug your power connector of your power cable into the power connector
at the back
of the HomePlug Ethernet Bridge
Plug the power plug of your power cable directly into a power outlet on
the wall
**Note: ** Do not plug the device into a UPS or power strip with surge
protection. The HomePlug Ethernet Bridge has its own power filter
for protection against surges.
6