Edimax Technology WP-S1300 - Manual (Page 8)

8
Projector Server Setup
If you plan on putting the projector
server on a desk or other horizontal
surfaces, stick the foot pads on the 4
locations as indicated is the picture.
Skip this step if you plan on hanging
the projector server on the wall.
Connect the Ethernet cable to the
LAN port (this port is labeled as
“LAN”
and is located at the back of this
projector server).
Connect the projector server to an
amplifier or a set of speakers via the
audio port.
You can skip this step if you do not
have an amplifier or speakers.