Edimax Technology BR-6214K - Manual (Page 19)

15
After a firmware upgrade file is selected, click ‘Apply’ button, and the router will start
firmware upgrade procedure automatically. The procedure may take several minutes,
please be patient.
3-3 System Reset
If you think the network performance is bad, or you found the behavior of the router is
strange, you can perform a router reset, sometime it will solve the problem.
To do so, please click ‘Tool’ located at the upper-right corner of web management
interface, then click ‘Reset’ on the left of web management interface, then the
following message will be displayed on your web browser:
Please click ‘Apply’ to reset your router, and it will be available again after few
minutes, please be patient.
NOTE: Never interrupt the upgrade procedure by closing the web browser or
physically disconnect your computer from router. If the firmware you uploaded is
corrupt, the firmware upgrade will fail, and you may have to return this router to
the dealer of purchase to ask for help. (Warranty voids if you interrupted the
upgrade procedure).