Edimax Technology IC-7000PTn V3 - Manual (Page 22)

22
5. In
„IP address‟ field, please fill in any IP address begins with „192.168.2‟,
and ends with a value greater than 2 and less than 254 (You can use the
example in the picture
„192.168.2.339‟). In Subnet mask field, please fill
„255.255.255.0‟. Please keep all other fields empty, and click „OK‟.
If you changed the IP address of this Network camera and you forget it,
there ‟re 2 methods to recover it:
a. Press and hold the
„Reset‟ button located at the bottom of this Network
camera, to clear all settings of the Network camera and reset the IP
address back to 192.168.2.3. You
‟ll lose all settings in the Network
camera.
b. Ask network administrator to check the DHCP release table, if the
camera was set to obtain the IP address by DHCP, a new record will
be added to DHCP release table on DHCP server when the Network
camera is connected to the local area network.